Siemens to Expand China’s Nanjing line
Siemens has received an order from the Nanjing Metro Corporation to equip a 52-kilometer line with the Trainguard MT automatic train protection system for the Nanjing-GaoChun LuGao section. Siemens will be using LTE (Long Term Evolution) radio technology for the first time here in order to transfer mass data in real time.
Siemens has received an order from the Nanjing Metro Corporation to equip a 52-kilometer line with the Trainguard MT automatic train protection system for the Nanjing-GaoChun LuGao section. Siemens will be using LTE (Long Term Evolution) radio technology for the first time here in order to transfer mass data in real time. The line links six stations in the Gaochun district in the south with the center of the megacity. Following commissioning at the end of 2017, trains will run at a top speed of 120 km/h on this stretch.
The introduction of the mobile radio standard Long Term Evolution (LTE) is the next stage of mobile communication, and offers better performance than WiFi. As the communication transfer technology between train and line for CBTC (Communication-based Train Control), CCTV (Closed Circuit Television) and passenger information LTE has advantages such as greater data bandwidth, service quality assurance for multiple services and higher interference suppression performance.
China’s megacities alone are home to more than 260 million people. These gigantic conurbations have recently undergone rapid growth of around two percent per year, and are suffering increasing traffic problems caused by the soaring rate of car use. Hence the correspondingly strong demand for solutions for the further development of urban rail transport. In the long term more than ten metro and mass transit lines will be built in Nanjing. Five of the current lines in operation or in construction are already equipped with Siemens rail automation technology.
Siemens can look back on a long partnership with the Nanjing Metro Corporation. Siemens equipped metro line 1, which started running in 2005 and is now 38 kilometers long, as well as metro line 2 in 2010. Line 2 serves 26 stations and forms the east-west tangent of the city of Nanjing in eastern China. Following the extension of the city’s metro with line 2, the rail network now covers 76 kilometers. Siemens also equipped lines 3 and 10 with signaling and control technology. These lines have been running since April 2015 and July 2014. Commissioning of the 37-kilometer Ninghe Intercity Line, which Siemens will equip with the CBTC Trainguard MT train protection system, is scheduled for September 2017.